Deck floor is a steel corrugated iron floor plate that is linked on a steel structural beam system by welding nails. The structure of the deck is a corrugated galvanized sheet. Deck floor is manufactured at the factory with high technical requirements. This type of floor has the effect of replacing floor formwork without a support tree. Combined with bearing forces with reinforced concrete floors, it helps to speed up the construction progress.

Has the effect of replacing floor formwork during construction. Join forces with reinforced concrete floor system during use. The commonly used thickness is 0.75mm; 0.95mm and 1.15mm

Produced by cold-rolled thin-walled steel method.

Depending on the requirements of each project such as the type of decking sheet, thickness, length… The rolled sheet is put into the rolling machine and produced as required.

Superior design with 50mm to 75mm high waves. Usable sizes 1000mm and 870mm. Large wave crests, between the wave crests, there are small ribs to increase the stiffness, bearing capacity and adhesion to concrete. The 1000mm usable gauge is economical and convenient in installation. The 870mm width allows the design of span structures, large beams, with great bearing capacity and bending resistance. Saving material costs, structural processing brings high economic efficiency.

Between the 2 wave legs is improved to create additional waves. Helps increase the stiffness of the corrugated board. Allows to design a large purlin distance with a higher level of safety than conventional corrugated iron. In addition, creating additional waves also makes traveling easier. Do not deform the corrugated board when erecting

The ceiling surface has high aesthetics so there is no need to plaster or make false ceilings: The deck is galvanized on both sides, so the surface is bright and very durable in the wet weather conditions of Vietnam. We can keep this surface or can paint it black to create an industrial space for restaurant and cafe spaces.